Dear User,

First of all thank you for your feedback/queries on our recent article on Computerized PDI & FIR Reports using KurtSPC System.

This articles focus is on usage of measuring Size, Ovality & Taper in one stroke and Profile Chart of your parameter.

You must be producing parts whose size and ovality both are critical for you. Manually you will be using instruments to measure size and ovality individually. Even Almost all SPC System providers in India are following the practice of measuring size and ovality individually. Ideally the system should be smart enough to measure both the parameters in one stroke. Here dynamic data collection comes into action. Dynamic data is collected by taking several measurements over time to determine maximum, minimum or average measurement.

In the KurtSPC LVDT module, dynamic data is collected at a very high speed i.e. 250 - 300 reading per second. For e.g. operator takes 4-5 seconds for one air-plug revolution, means that KurtSPC will capture more than 1,000 readings along the circumference of Bore or OD. And if you divide this points in 360 degree it will be distributed as almost 4 points per degree (Against conventional method of checking ovality at two points i.e 0 & 90 Degree. This is common solution offered by all local Air-Gage suppliers). This will give you the precise size as well as ovality. KurtSPC is the only system in India which provides such high speed data collection. The reason behind this is Software intelligence with a USB based interface. For your information,a USB connection is thousand times faster than COM ports. You will get more astonishing facts & figures on "USB ports over COM ports" from internet. As a quality personnel it is likely that you may not be aware of USB Ports. Consult your IT Person, he will explain to you about USB (Universal Serial Bus Controllers) Ports.

If you want to see all points captured in Dynamic measumrent, KurtSPC has a feature to draw Profile Charts from these points. Checkout the Profile Charts. It displays each sample point with it's ID and value plotted against time.

On-Line KurtSPC System stands for:

• Static / Dynamic Data Collection
• Capturing data from PLC or from Network directly
• Capturing data from flat text file
• Capturing data from all Digimatic-Mitutoyo Instruments, SYLVAC, TESA, MAHR or weighing scales.
• Logic Programming in SPC Software to make it customize by anyone at anytime, anywhere
• Gage R&R as a build-in utility
• Real-Time Monitoring / Analysis
• Connectivity with ERP and 3rd Party Database
• Customized PDI & FIR Reports
• Vendor Rating
• Supplier Quality Management
• Web Based Reporting
• Trend Analysis i.e. SPC Statistics by Months, Weeks, Week Days, Hours
• Summary Report of part parameter's SPC Statistics
• On-Line Support of SPC System
• Future Upgrades to keep in pace with technology & demand
• Intra-Plant Connectivity of KurtSPC System and many more to come
  
  That's why we say "choosing a SPC System is more than just picking SPC Software".

  Visit our website www.keshrup.com to find exact solution for your On-Line SPC System requirement. If you need assistance, we are available by phone: 0250-2391365 or fax: 0250-2391366.
  

With Regards

Sameer Anavkar
Keshrup Systems Pvt. Ltd.
M: 94224-34843